Display MCU
WT6720
【 General Description 】 |
The WT6720 is a monitor power manager with 1)Analog SOG detector, 2)DPMS detector, 3)8-bit A/D converter, 4)Slave I2C interface, 5)External IRQ interrupt, 6)Low voltage reset, 7)RC oscillator, 8)3.3V LDO, 9)GPIO portThe WT6720 is a monitor power manager with 1)Analog SOG detector, 2)DPMS detector, 3)8-bit A/D converter, 4)Slave I2C interface, 5)External IRQ interrupt, 6)Low voltage reset, 7)RC oscillator, 8)3.3V LDO, 9)GPIO port |
【 Features 】 | |
● | Analog SOG sync detector |
● | Sync processor for monitoring DPMS (support H+V inputs)wake up signal |
● | 8-bit A/D converter with 2 selectable inputs, shared with IO pin |
● | Slave mode IIC interface, bit rate up to 400Kb/sec |
● | External IRQ interrupt with programmable digital filter for noise rejection |
● | One low frequency PWM for LED blink control |
● | Tri-state I/O structure, I/O state can decided by external resister |
● | One open drain output directly driving LED |
● | Build-in RC oscillator |
● | Low voltage reset |
● | Build-in 3.3v LDO |
● | 5/3.3 volt operating voltage supported |
● | Power consumption : Lower than 1mA |
● | Operating temperature : -10℃ to + 85 ℃ |
● | ESD protection level : >4KV |
● | Package: SOP16/SOP8 |
【 PIN ASSIGNMENT 】 | |
● | Package |
● | Ordering information |