【 Features 】 |
● |
Analog input ports |
|
-6 analog inputs |
|
-Support CVBS, S-Video, and YPbPr input |
|
-Video input resolution in 480i/p, 576i/p, 720p and 1080i |
|
-Support PC RGB input |
|
-RGB input resolution in 640x480, 800x600, 1024x768, 1280x800 and 1280x1024@60Hz |
|
-Support RGB CSYNC, SOG, Hsync and Vsync |
|
-Auto white balance, auto-gain/auto-phase adjustment |
|
-3-channel low-power 10-bit ADCs integration for YPbPr and RGB support up to 108Mhz |
● |
Digital input ports |
|
-8-bit 4:2:2 ITU-BT.656 or BT.601 interface |
|
-16-bit 4:2:2 ITU-BT.656 or BT.601 interface |
|
-16-bit RGB-565 interface |
● |
LCD panel interfaces |
|
-Support 18-bit and 24-bit digital panel, Serial RGB panel |
|
-Support single 8-bit LVDS panel output up to 1366x768 |
|
-Support resolution: 640x480, 800x480, 800x600, 1024x768 and 1366x768 (digital/LVDS output) |
|
-Programmable timing controller for different type of panels |
|
-Programmable gamma table for panel compensation |
● |
2D video decoder |
|
-10-bit ADC |
|
-Supports CVBS, S-video and RGB input |
|
-Decodes NTSC (M, Japan, 4.43), PAL (B, G, D, H, I, Nc), and SECAM |
|
-Multi-standard adaptive 2D comb filter |
|
-Safe Hsync, Vsync and field signal outputs when VCR trick mode |
|
-Auto detection and decodes Macrovision copy protection |
|
-Chroma Transient Improvement (CTI) |
|
-Luma Transient Improvement (LTI), edge/sharpness improvement |
|
-Luma Coring noise reduction |
● |
Display format conversion |
|
-Programmable horizontal and vertical zoom ratio |
|
-Support no-linear scaling for 4:3 to 16:9 |
|
-Convert interlaced input to progressive |
● |
Luminance and chrominance adjustments |
|
-Contrast adjustment with black/white level stretch |
|
-Brightness adjustment |
|
-Sharpness adjustment |
|
-Hue adjustment |
|
-Saturation adjustment |
|
-Flesh tone adjustment |
● |
OSD |
|
-Character based OSD |
|
-Font size: 16x18 dots |
|
-Font ROM: 512 single color fonts |
|
-Display RAM: 1024 x 24 bits (display up to 1024 characters) |
|
-User-font RAM: 4096 x 16 bits (up to 226 single color fonts) |
|
-Support 3-bit multi-color font |
|
-Border effect of character |
|
-Two display windows |
|
-Programmable background window |
|
-Support alpha blending |
|
-Support blinking effect |
|
-Support fade in/out effect |
● |
MCU |
|
-Built-in turbo 8051 MCU |
|
-Data memory: 256 + 768 bytes RAM |
|
-Support external program memory with serial flash memory via 4-wire interface |
|
-Support external MCU mode |
● |
10-bit ADC for keypad scanning |
● |
Multiple communication interfaces |
|
-Two slave mode I2C interfaces, up to 400 kHz |
|
-Interface for ISP, ICE and other I2C master |
|
-Support dual standard UART, one of the UART can be defined for ISP/ICE channel |
|
-Support Infra-Red remote control |
● |
Four PWM outputs including one low frequency PWM |
● |
Charge pump circuits for VGH and VGL |
● |
DC-DC converter supports LED backlight with brightness control |
● |
General purpose I/Os |
● |
Spread spectrum PLL for panel clock |
● |
Built-in self test pattern generator |
● |
24MHz crystal oscillator and support clock output for external MCU |
● |
Support multiple saving modes |
|
-Standby mode: all circuits can be powered down except MCU |
|
-Off mode: all circuits power down, MCU is waked up by interrupt |
● |
Operating temperature range: -40℃ to +85℃ |
● |
Package type: |
|
-128-pin LQFP, 14mm(L) x 14mm(W) x 1.4mm(H) |
|
-Green package available |