Touch Device Controller
WT5090
【 General Description 】 |
The WT5090 is a CMOS 8-bit single-chip microcontroller with Hardware LCD module driver Port & SPI interface & UART. It includes an 8-bit 6502 CPU core, 12K bytes RAM, 16K bytes ROM, External ROM Access capability maximum size up to 8M bytes, 32 programmable I/O with controllable Pull-UP resistors, dual 16-bit timer/counters, interrupt controller, and 8 channel of 12-bit A/D converter. |
【 Features 】 | |
● | 8-bit 6502 CPU |
● | 12Kbytes SRAM and 16Kbytes ROM |
● | External ROM Access capability maximum size up to 8M bytes |
● | Operating Voltage 5V ±10% |
● | Crystal OSC circuit with maximum frequency up to 16 MHz |
● | Offer 8 interrupt sources ; all sources have independent latches each and multiple interrupt control is available |
- bit 0 ---- SPI | |
- bit 1 ---- ADC | |
- bit 2 ---- Ptimer0 | |
- bit 3 ---- Ptimer1 | |
- bit 4 ---- RTC | |
- bit 5 ---- UART of TxD buffer is empty | |
- bit 6 ---- UART of RxD buffer is full | |
- bit 7 ---- External Port Interrupt | |
● | 32 programmable I/O port with pull-up resisters |
● | Port0 with 25mA sink/source current and share with Analog input, Port1, Port2, Port3 with 3mA sink current. |
● | 16 external interrupt pin (selectable rising / falling edge trigger) |
● | Dual 16-bit timer/counters and timer output Pin |
● | One 2Hz RTC timer |
● | 8 channels 12 bit resolution AD converter |
● | Hardware LCD module driver Port |
● | 3wire / 2 wire SPI ( selectable 1~32 bit serial data in / out ) |
● | UART interface |
● | Support two kinks of standby modes – STOP and HALT |
● | Package: LQFP100 |